Description

Perma-Patch Crack Sealant Mastic T2 is a hot-applied repair mastic comprised of a black, asphalt-based, poly-mer-modified binder and a select aggregate. This material is self-adhesive. Perma-Patch Crack Sealant Mastic T2 resists cracking, delamination, and spalling. It is a flexible material that can withstand heavy loads, weather, traffic, and thermal movement. Mastic T2 provides a high-friction surface to ensure driver safety. Compaction equipment is not necessary with Perma-Patch Crack Sealant Mastic T2. This repair system is formulated to provide a feathered edge.

Recommended Uses

Perma-Patch Crack Sealant Mastic T2 is recommended for sealing wide cracks and joints, as well as repairing a large variety of distresses in cement and asphalt pavements. It is designed for large cracks and distressed surface areas too small for re-paving yet too large for traditional hot-applied crack sealants.

  • Pavement cracks or joints over 1.5 inches wide
  • Potholes, utility cuts, manhole covers
  • Spalls, pop-outs, and corner breaks
  • Localized skin patch repairs
  • Repairs prior to surface treatments
  • Bridge approaches or faulted areas
  • Depressed thermal

Surface Preparation

Proper surface preparation facilitates adhesion and consequently the maximum service life of the mastic. In order for proper adhesion to occur, the surface must be free of moisture, dust, loose aggregate, and other contaminants. Avoid use in highly distressed areas that require reconstruction. The substrate and air temperatures must be 40 °F or above. Use oil-free compressed air and heat to clean and dry the area immediately prior to application. Heating the pavement will promote bonding between the mastic and pavement surface. Caution: Do not overheat/oxidize the pavement.

Specifications

  • ASTM D 8260 Types 1 & 2

Perma-Patch® Crack Sealant Mastic T2 45lb Meltable Box

PPCS-MAS-MB

Innovative Solution to Extend the Life of Cracked Paving

crack sealant calculator

Crack dimensions
0
0
0
0
ft.
Perma-Patch® Product
0
boxes

Get a Quote

Weight 45 lbs
Dimensions 19.5 × 12 × 4.5 in
Maximum Heating Temperature (° F)

400

Application Temperature (° F)

375-400

Heating Time (Hours Max.)

12

Penetration (dmm Max.)

50

Flow (mm Max. at 140° F)

0

Softening Point (°F Min.)

220

Low Temperature Flexibility (° F)

0

Viscosity (Poise Max. at 375)

100

Specific Gravity

1.8

Asphalt Compatibility (D5329-12)

Pass

Flash Point (°F Min.)

400

Optimal Climate (° F)

20-140

Resiliency (% Min. at 77° F)

50

Net Weight (lb)

45

Net Weight (kg)

20.4