Give Your Crew a Break
While Hot Mix Asphalt plays a key role in the creation of roads, we believe Perma-Patch is the best option for the maintenance and repair of potholes. What sets us apart from the competition?
Save Time From Repeat Repairs with Perma-Patch
12 Key Benefits to using Perma-Patch vs. Hot Mix Asphalt:
1. DURABILITY
Stop fixing the same pothole again and again. Save money, time, and hassle.
Perma-Patch
Perma-Patch is the most durable among pothole repair materials per Federal Strategic Highway Research Project “SHRP” Test, even with basic “throw and roll” application.
Hot asphalt patch
Low durability means potholes come back. Unless proper compacting equipment is used and all preparation and temperature requirements are followed, pothole repairs with hot-mix will often fail again within six months
2. WEATHER
Make repairs in any condition.
Perma-Patch
Can be applied in any weather, even the rain.
Hot asphalt patch
Cannot be used in rain or under wet conditions.
3. PRODUCT TEMPERATURE
No wasted material.
Perma-Patch
No heating required. Perma-Patch is ready to go at any time, and can be used all day (and night) long.
Hot asphalt patch
Hot-mix asphalt leaves the asphalt plant at 275-300°F, and starts to cool immediately. Below 225°F hot mix asphalt will not bond well to the substrate, reducing its effectivity for pavement repairs. Below 185°F hot mix starts to become too rigid to flow into repairs. Pretty soon your crew is riding around with nothing but landfill in their truck.
4. VERSATILITY
Finally fix your toughest challenges.
Perma-Patch
Perma-Patch has extreme versatility. Trust Perma-Patch for your toughest repairs around man holes, ramps, bridge joints, narrow paths, depressions.
Hot asphalt patch
Little versatility. Used primarily only for road repairs. Larger aggregates and fast cooling mean hot mix should really only be used for larger road repairs where a roller can be applied.
5. EQUIPMENT
Forget all that equipment and the big crew.
Perma-Patch
No additional equipment required and only one person needed during application.
Hot asphalt patch
Requires an asphalt plant, dump truck, compactor, and a multiple-person crew.
6. PREPARATION
No need for preparation: Save time and make more durable repairs.
Perma-Patch
None. Simply open, pour, and done.
Hot asphalt patch
Pothole must be thoroughly cleaned of all loose aggregate and dry. Crews that don’t thoroughly prepare repair areas are simply generating the need for another future repair.
7. SHELF-LIFE
Be ready any time.
Perma-Patch
With a 2 year shelf-life, Perma-Patch can be kept on-hand and ready for immediate repairs at any time.
Hot asphalt patch
Hot-mix is the very definition of no shelf-life. Pickup requires coordination, planning, and frequently lost labor hours.
8. TACK COAT
No need for tack coat.
Perma-Patch
Perma-Patch doesn’t require any preparation other than removal of loose asphalt pieces and stones.
Hot asphalt patch
Tack coat must be applied to all surfaces in the pothole. Requires tack coat and additional equipment, plus labor and additional time.
9. TRAFFIC & DRY TIME
Open the road fast.
Perma-Patch
No dry or cure time, accepts traffic immediately.
Hot asphalt patch
Thermoplastics require time to cure and cool, requiring traffic to be diverted for extended periods of time.
10. DEPTH
Fix water ponding.
Perma-Patch
Can be applied as thin as ¼” or less.(Must use Perma-Patch Fine Mix)
Hot asphalt patch
Pothole depth must be a minimum of 1″ in all areas of hole including at the interface of the surrounding surface. Hot asphalt mix can’t fix thin areas or be feathered to an edge.
11. AMBIENT TEMPERATURE
Can be applied in extreme temperatures.
Perma-Patch
Minimum of 0°F.
Hot asphalt patch
Pothole depth must be a minimum of 1″ in all areas of hole including at the interface of the surrounding surface. Hot asphalt mix can’t fix thin areas or be feathered to an edge.Minimum of 40°F.Pothole depth must be a minimum of 1″ in all areas of hole including at the interface of the surrounding surface. Hot asphalt mix can’t fix thin areas or be feathered to an edge.
12. WASTE
Stop adding to the landfill.temperatures.
Perma-Patch
Minimal. Little to no waste is produced during application.
Hot asphalt patch
High. About 25-50% of product is not usable and wasted during application.
Contact Us Today For A Sample Of Perma-Patch
About the author
Jessie Cali
Jessie Cali is a Marketing Consultant with 10+ years professional experience within the construction and infrastructure industries. She is our brand expert and designer at Perma-Patch. Jessie has also written many blogs on our Perma-Patch product lines.
